fiber optic light source Benchtop High Stable Light Source benchtop light source

The SNPD1100 series high stable light source are microprocessor controlled laser diode sources which can support the variety of

The SNPD1100 series high stable light source are microprocessor controlled laser diode sources which can support the variety of emitters such as: DFB, FP, PUMP, SLED etc. It is specially used in passive components testing, power meter calibration and general laboratory uses.

Features

1. Provides 1~3 wavelength channels, any wavelength(s) can be optional

2. High Stability and Reliability

Stability: ±0.005 dB@15 min& ±0.05 dB@24 hour

Accurate internal temperature control ensures the constant output wavelength and low bias.

3. Output power can be adjustable, the range is among 5%~100% based on the maximum output power.

SNPD1100 adopts the digital adjustment of output power, to prevent the inconsistency bring from the potentiometers.

4. Digital adjustment of laser emitter temperature SNPD1100 supports the digital adjustment of laser emitter temperature, so that the user can do the slight adjustment for the wavelength when in necessary.

5. Over temperature protection

SNPD1100 will cut off the laser emitter automatically and stop the work when the surrounding temperature over the limitation.

6. Auto Fan Control

SNPD1100 can sensor the temperature through the internal transducer, and it will start once the temperature over the standard, this can increase the using life of the unit.

Specifications

TYPE	SNPD1100
Operating Wavelength (nm)	850,980,1300,1310, 1480,1550, 1625 ect.	1310/1550,1310/1480, 1480/1550,980/1550 etc.	1310/1490/1550 or others
Optical Connector	FC/APC(Other type adapters can be cusomized)
-3dB Spectral Width (nm)	<0.1
-20dB Spectral Width (nm)	<0.5
Side mode suppression ratio (dB)	>35(DFB)
Maximum Output Power (mw)	≥1; ≥2; ≥5; ≥10 (others please specify)
Output power stability in 15 minutes(dB)	±0.005
Output power stabiltiy in 24 hours(dB)	±0.05
Digital Internal Modulation	1Hz~20KHz
Digital External Modulation	0Hz~20KHz
TEC stability	±0.01°C@15 minutes; ±0.05°C@ 24 hours
Power Supply	110V or 220V (50Hz~60Hz)
Operating Temperature	10~+50°C
Storage Temperature	-10~+60°C
Warm Up Time(hour)	0.5
Dimensions(mm)	280*260*120
Net Weight(kg)	4.7
Remark: All specifications stated here are depend on DFB laser, Specifications like emitter types, central wavelength, output power on demand.

Standard Packages

MODEL	INCLUDES
SNPD1100	JWD1100 High Stable Light Source, Power Supply Cord, Fuze, Instruction Manul and Cotton swabs.

fiber optic light source Benchtop High Stable Light Source benchtop light source